Contact us for a detailed quotation and specifications sheet.
Send InquiryTell us your project · We respond within 24 hours
The UPSEN UJC906 is a tracked mobile jaw crusher built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 80-150 t/h, fed from a 5 m3 hopper and taking material up to 525 mm at the inlet.
The unit travels as one load on a low-bed trailer — 13.8×2.8×3.8 m and 28,268 kg — and is driven by 200 kW, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.
When specifying a tracked mobile jaw crusher, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.
| Model | Capacity | Max. feed size | Total weight |
|---|---|---|---|
| UJC906 (this model) | 80-150 t/h | 525 mm | 28,268 kg |
| UJC106 | 150-300 t/h | 630 mm | 43,268 kg |
| UJC116 | 160-500 t/h | 650 mm | 52,500 kg |
| UJC425 | 6-8 t/h | 180×300 mm | 1,300 kg |
Based on rated capacity, the following UPSEN units are usually specified together with the UJC906:
Rated capacity is 80-150 t/h. Actual output depends on the material, the feed size and the discharge setting.
The UJC906 accepts material up to 525 mm.
28,268 kg, transport size 13.8×2.8×3.8 m. It can be moved on a standard low-bed trailer without dismantling.
200 kW.
Yes — UPSEN machines are CE certified and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.
A single tracked unit rarely does everything — pair the UJC906 with the equipment below to build a working line.
