Contact us for a detailed quotation and specifications sheet.
Send InquiryTell us your project · We respond within 24 hours
The UPSEN UTC503 is a trailer-mounted jaw crusher built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 10-30 t/h, fed from a 1.8 m3 hopper and taking material up to 250 mm at the inlet.
The unit travels as one load on a low-bed trailer — 3500×1930×2250 mm and 5,500 kg — and is driven by 40 kW, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.
When specifying a trailer-mounted jaw crusher, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.
| Model | Capacity | Max. feed size | Total weight |
|---|---|---|---|
| UTC503 (this model) | 10-30 t/h | 250 mm | 5,500 kg |
| UTC604 | 30-50 t/h | 350 mm | 3.5 tons |
| UHC600 | 20-40 t/h | < 300 mm | 3.8 tons |
| UIC80 | 30-150 t/h | 500 mm | 24,000 kg |
Based on rated capacity, the following UPSEN units are usually specified together with the UTC503:
Rated capacity is 10-30 t/h. Actual output depends on the material, the feed size and the discharge setting.
The UTC503 accepts material up to 250 mm.
5,500 kg, transport size 3500×1930×2250 mm. It can be moved on a standard low-bed trailer without dismantling.
40 kW.
Yes — UPSEN machines are CE certified and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.
A single tracked unit rarely does everything — pair the UTC503 with the equipment below to build a working line.
